Bring in resque recipes and rake tasks

Rakefile

@@ -7,5 +7,6 @@
 
 require File.expand_path('../config/application', __FILE__)
 require 'rake'
+require 'resque/tasks'
 
 Diaspora::Application.load_tasks

chef/cookbooks/centos/files/default/redis.conf

+# Redis configuration file example
+
+# Note on units: when memory size is needed, it is possible to specifiy
+# it in the usual form of 1k 5GB 4M and so forth:
+#
+# 1k => 1000 bytes
+# 1kb => 1024 bytes
+# 1m => 1000000 bytes
+# 1mb => 1024*1024 bytes
+# 1g => 1000000000 bytes
+# 1gb => 1024*1024*1024 bytes
+#
+# units are case insensitive so 1GB 1Gb 1gB are all the same.
+
+# By default Redis does not run as a daemon. Use 'yes' if you need it.
+# Note that Redis will write a pid file in /usr/local/var/run/redis.pid when daemonized.
+daemonize no
+
+# When running daemonized, Redis writes a pid file in /usr/local/var/run/redis.pid by
+# default. You can specify a custom pid file location here.
+pidfile /usr/local/var/run/redis.pid
+
+# Accept connections on the specified port, default is 6379
+port 6379
+
+# If you want you can bind a single interface, if the bind option is not
+# specified all the interfaces will listen for incoming connections.
+#
+# bind 127.0.0.1
+
+# Close the connection after a client is idle for N seconds (0 to disable)
+timeout 300
+
+# Set server verbosity to 'debug'
+# it can be one of:
+# debug (a lot of information, useful for development/testing)
+# verbose (many rarely useful info, but not a mess like the debug level)
+# notice (moderately verbose, what you want in production probably)
+# warning (only very important / critical messages are logged)
+loglevel verbose
+
+# Specify the log file name. Also 'stdout' can be used to force
+# Redis to log on the standard output. Note that if you use standard
+# output for logging but daemonize, logs will be sent to /dev/null
+logfile stdout
+
+# Set the number of databases. The default database is DB 0, you can select
+# a different one on a per-connection basis using SELECT <dbid> where
+# dbid is a number between 0 and 'databases'-1
+databases 16
+
+################################ SNAPSHOTTING  #################################
+#
+# Save the DB on disk:
+#
+#   save <seconds> <changes>
+#
+#   Will save the DB if both the given number of seconds and the given
+#   number of write operations against the DB occurred.
+#
+#   In the example below the behaviour will be to save:
+#   after 900 sec (15 min) if at least 1 key changed
+#   after 300 sec (5 min) if at least 10 keys changed
+#   after 60 sec if at least 10000 keys changed
+#
+#   Note: you can disable saving at all commenting all the "save" lines.
+
+save 900 1
+save 300 10
+save 60 10000
+
+# Compress string objects using LZF when dump .rdb databases?
+# For default that's set to 'yes' as it's almost always a win.
+# If you want to save some CPU in the saving child set it to 'no' but
+# the dataset will likely be bigger if you have compressible values or keys.
+rdbcompression yes
+
+# The filename where to dump the DB
+dbfilename dump.rdb
+
+# The working directory.
+#
+# The DB will be written inside this directory, with the filename specified
+# above using the 'dbfilename' configuration directive.
+# 
+# Also the Append Only File will be created inside this directory.
+# 
+# Note that you must specify a directory here, not a file name.
+dir /usr/local/var/db/redis/
+
+################################# REPLICATION #################################
+
+# Master-Slave replication. Use slaveof to make a Redis instance a copy of
+# another Redis server. Note that the configuration is local to the slave
+# so for example it is possible to configure the slave to save the DB with a
+# different interval, or to listen to another port, and so on.
+#
+# slaveof <masterip> <masterport>
+
+# If the master is password protected (using the "requirepass" configuration
+# directive below) it is possible to tell the slave to authenticate before
+# starting the replication synchronization process, otherwise the master will
+# refuse the slave request.
+#
+# masterauth <master-password>
+
+################################## SECURITY ###################################
+
+# Require clients to issue AUTH <PASSWORD> before processing any other
+# commands.  This might be useful in environments in which you do not trust
+# others with access to the host running redis-server.
+#
+# This should stay commented out for backward compatibility and because most
+# people do not need auth (e.g. they run their own servers).
+# 
+# Warning: since Redis is pretty fast an outside user can try up to
+# 150k passwords per second against a good box. This means that you should
+# use a very strong password otherwise it will be very easy to break.
+#
+# requirepass foobared
+
+################################### LIMITS ####################################
+
+# Set the max number of connected clients at the same time. By default there
+# is no limit, and it's up to the number of file descriptors the Redis process
+# is able to open. The special value '0' means no limits.
+# Once the limit is reached Redis will close all the new connections sending
+# an error 'max number of clients reached'.
+#
+# maxclients 128
+
+# Don't use more memory than the specified amount of bytes.
+# When the memory limit is reached Redis will try to remove keys with an
+# EXPIRE set. It will try to start freeing keys that are going to expire
+# in little time and preserve keys with a longer time to live.
+# Redis will also try to remove objects from free lists if possible.
+#
+# If all this fails, Redis will start to reply with errors to commands
+# that will use more memory, like SET, LPUSH, and so on, and will continue
+# to reply to most read-only commands like GET.
+#
+# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
+# 'state' server or cache, not as a real DB. When Redis is used as a real
+# database the memory usage will grow over the weeks, it will be obvious if
+# it is going to use too much memory in the long run, and you'll have the time
+# to upgrade. With maxmemory after the limit is reached you'll start to get
+# errors for write operations, and this may even lead to DB inconsistency.
+#
+# maxmemory <bytes>
+
+############################## APPEND ONLY MODE ###############################
+
+# By default Redis asynchronously dumps the dataset on disk. If you can live
+# with the idea that the latest records will be lost if something like a crash
+# happens this is the preferred way to run Redis. If instead you care a lot
+# about your data and don't want to that a single record can get lost you should
+# enable the append only mode: when this mode is enabled Redis will append
+# every write operation received in the file appendonly.aof. This file will
+# be read on startup in order to rebuild the full dataset in memory.
+#
+# Note that you can have both the async dumps and the append only file if you
+# like (you have to comment the "save" statements above to disable the dumps).
+# Still if append only mode is enabled Redis will load the data from the
+# log file at startup ignoring the dump.rdb file.
+#
+# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
+# log file in background when it gets too big.
+
+appendonly no
+
+# The name of the append only file (default: "appendonly.aof")
+# appendfilename appendonly.aof
+
+# The fsync() call tells the Operating System to actually write data on disk
+# instead to wait for more data in the output buffer. Some OS will really flush 
+# data on disk, some other OS will just try to do it ASAP.
+#
+# Redis supports three different modes:
+#
+# no: don't fsync, just let the OS flush the data when it wants. Faster.
+# always: fsync after every write to the append only log . Slow, Safest.
+# everysec: fsync only if one second passed since the last fsync. Compromise.
+#
+# The default is "everysec" that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# If unsure, use "everysec".
+
+# appendfsync always
+appendfsync everysec
+# appendfsync no
+
+################################ VIRTUAL MEMORY ###############################
+
+# Virtual Memory allows Redis to work with datasets bigger than the actual
+# amount of RAM needed to hold the whole dataset in memory.
+# In order to do so very used keys are taken in memory while the other keys
+# are swapped into a swap file, similarly to what operating systems do
+# with memory pages.
+#
+# To enable VM just set 'vm-enabled' to yes, and set the following three
+# VM parameters accordingly to your needs.
+
+vm-enabled no
+# vm-enabled yes
+
+# This is the path of the Redis swap file. As you can guess, swap files
+# can't be shared by different Redis instances, so make sure to use a swap
+# file for every redis process you are running. Redis will complain if the
+# swap file is already in use.
+#
+# The best kind of storage for the Redis swap file (that's accessed at random) 
+# is a Solid State Disk (SSD).
+#
+# *** WARNING *** if you are using a shared hosting the default of putting
+# the swap file under /tmp is not secure. Create a dir with access granted
+# only to Redis user and configure Redis to create the swap file there.
+vm-swap-file /tmp/redis.swap
+
+# vm-max-memory configures the VM to use at max the specified amount of
+# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
+# is, if there is still enough contiguous space in the swap file.
+#
+# With vm-max-memory 0 the system will swap everything it can. Not a good
+# default, just specify the max amount of RAM you can in bytes, but it's
+# better to leave some margin. For instance specify an amount of RAM
+# that's more or less between 60 and 80% of your free RAM.
+vm-max-memory 0
+
+# Redis swap files is split into pages. An object can be saved using multiple
+# contiguous pages, but pages can't be shared between different objects.
+# So if your page is too big, small objects swapped out on disk will waste
+# a lot of space. If you page is too small, there is less space in the swap
+# file (assuming you configured the same number of total swap file pages).
+#
+# If you use a lot of small objects, use a page size of 64 or 32 bytes.
+# If you use a lot of big objects, use a bigger page size.
+# If unsure, use the default :)
+vm-page-size 32
+
+# Number of total memory pages in the swap file.
+# Given that the page table (a bitmap of free/used pages) is taken in memory,
+# every 8 pages on disk will consume 1 byte of RAM.
+#
+# The total swap size is vm-page-size * vm-pages
+#
+# With the default of 32-bytes memory pages and 134217728 pages Redis will
+# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
+#
+# It's better to use the smallest acceptable value for your application,
+# but the default is large in order to work in most conditions.
+vm-pages 134217728
+
+# Max number of VM I/O threads running at the same time.
+# This threads are used to read/write data from/to swap file, since they
+# also encode and decode objects from disk to memory or the reverse, a bigger
+# number of threads can help with big objects even if they can't help with
+# I/O itself as the physical device may not be able to couple with many
+# reads/writes operations at the same time.
+#
+# The special value of 0 turn off threaded I/O and enables the blocking
+# Virtual Memory implementation.
+vm-max-threads 4
+
+############################### ADVANCED CONFIG ###############################
+
+# Glue small output buffers together in order to send small replies in a
+# single TCP packet. Uses a bit more CPU but most of the times it is a win
+# in terms of number of queries per second. Use 'yes' if unsure.
+glueoutputbuf yes
+
+# Hashes are encoded in a special way (much more memory efficient) when they
+# have at max a given numer of elements, and the biggest element does not
+# exceed a given threshold. You can configure this limits with the following
+# configuration directives.
+hash-max-zipmap-entries 64
+hash-max-zipmap-value 512
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into an hash table
+# that is rhashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+# 
+# The default is to use this millisecond 10 times every second in order to
+# active rehashing the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply form time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here.  This is useful if you
+# have a standard template that goes to all redis server but also need
+# to customize a few per-server settings.  Include files can include
+# other files, so use this wisely.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf

chef/cookbooks/centos/recipes/main.rb

@@ -18,3 +18,4 @@ include_recipe "centos::image_magick"
 include_recipe "centos::mongo_db"
 include_recipe "common::main"
 include_recipe "centos::nginx"
+include_recipe "centos::redis"

chef/cookbooks/centos/recipes/redis.rb

+
+execute "refresh yum" do
+  command "yum update -y"
+end
+
+execute "install redis" do
+  command "yum install -y redis"
+end
+
+cookbook_file "/usr/local/etc/redis.conf" do
+  source "redis.conf"
+end
+
+execute "change redis.conf permissions" do
+  command "chmod 755 /usr/local/etc/redis.conf"
+end
+
+execute "make the redis db directory" do
+  command "mkdir -p /usr/local/var/db/redis"
+end

chef/cookbooks/common/recipes/daemontools.rb

@@ -49,9 +49,24 @@ execute "executable" do
   command "chmod -R 755 /service/magent"
 end
 
+execute "redis run" do
+  command "mkdir -p /service/redis && echo '#!/bin/sh' > /service/redis/run && echo 'cd /usr/sbin/ && exec /usr/sbin/redis-server /usr/local/etc/redis.conf'  >> /service/redis/run"
+end
+execute "executable" do
+  command "chmod -R 755 /service/redis"
+end
+
 execute "nginx run" do
   command "mkdir -p /service/nginx && echo '#!/bin/sh' > /service/nginx/run && echo 'exec /usr/local/nginx/sbin/nginx' >> /service/nginx/run"
 end
+
 execute "executable" do
   command "chmod -R 755 /service/nginx"
 end
+
+execute "resque worker run" do
+  command "mkdir -p /service/resque_worker && echo '#!/bin/sh' > /service/resque_worker/run && echo 'cd /usr/local/app/diaspora && RAILS_ENV=production QUEUE=* exec /usr/local/bin/bundle exec /usr/local/bin/rake resque:work' >> /service/resque_worker/run"
+end
+execute "executable" do
+  command "chmod -R 755 /service/resque_worker"
+end

config/initializers/resque.rb

 Dir[File.join(Rails.root, 'app', 'jobs', '*.rb')].each { |file| require file }
-
-config = YAML::load(File.open("#{Rails.root}/config/redis.yml"))
-Resque.redis = Redis.new(:host => config['host'], :port => config['port'])
-
+#config = YAML::load(File.open("#{Rails.root}/config/redis.yml"))
+#Resque.redis = Redis.new(:host => config['host'], :port => config['port'])
+require 'resque'

script/server

@@ -82,5 +82,5 @@ fi
 
 mkdir -p -v log/thin/
 bundle exec ruby ./script/websocket_server.rb&
-bundle exec magent start --log-path=log/ &
+#bundle exec magent start --log-path=log/ &
 bundle exec thin start $args

spec/models/user/receive_spec.rb

@@ -15,22 +15,10 @@ describe User do
   let(:user3) { make_user }
   let(:aspect3) { user3.aspects.create(:name => 'heroes') }
 
-
   before do
     connect_users(user, aspect, user2, aspect2)
   end
 
-
-
-
-
-
-
-
-
-
-
-
   it 'should stream only one message to the everyone aspect when a multi-aspected contacts posts' do
     user.add_person_to_aspect(user2.person.id, user.aspects.create(:name => "villains").id)
     status = user2.post(:status_message, :message => "Users do things", :to => aspect2.id)
@@ -61,7 +49,8 @@ describe User do
 
   describe '#receive_salmon' do
    it 'should handle the case where the webfinger fails' do
-    EMWebfinger.stub!(:fetch).and_return(nil)
+     pending "Write this to test #receive_salmon"
+    Webfinger.stub!(:fetch).and_return(nil)
 
     proc{
       user2.post :status_message, :message => "store this!", :to => aspect2.id

spec/spec_helper.rb

@@ -39,6 +39,13 @@ RSpec.configure do |config|
   end
 end
 
+
+module Resque
+  def enqueue(klass, *args)
+    true
+  end
+end
+
 ImageUploader.enable_processing = false